Technology Adoption and User Behaviour

Perceived Usefulness, Perceived Ease of Use, and User Acceptance of Information Technology

Valid measurement scales for predicting user acceptance of computers are in short supply. Most subjective measures used in practice are unvalidated, and their relationship to system usage is unknown. The present research develops and validates new scales for two specific variables, perceived usefulness and perceived ease of use, which are hypothesized to be fundamental determinants of user acceptance. Definitions for these two variables were used to develop scale items that were pretested for content validity and then tested for reliability and construct validity in two studies involving a total of 152 users and four application programs. The measures were refined and streamlined, resulting in two six-item scales with reliabilities of .98 for usefulness and .94 for ease of use. The scales exhibited high convergent, discriminant, and factorial validity. Perceived usefulness was significantly correlated with both self-reported current usage (r=.63, Study 1) and self-predicted future usage (r=.85, Study 2). Perceived ease of use was also significantly correlated with current usage (r=.45, Study 1) and future usage (r=.59, Study 2). In both studies, usefulness had a significantly greater correlation with usage behavior than did ease of use. Regression analyses suggest that perceived ease of use may actually be a causal antecedent to perceived usefulness, as opposed to a parallel, direct determinant of system usage. Implications are drawn for future research on user acceptance.

User Acceptance of Information Technology: Toward A Unified View1

Information technology (IT) acceptance research has yielded many competing models, each with different sets of acceptance determinants. In this paper, we (1) review user acceptance literature and discuss eight prominent models, (2) empirically compare the eight models and their extensions, (3) formulate a unified model that integrates elements across the eight models, and (4) empirically validate the unified model. The eight models reviewed are the theory of reasoned action, the technology acceptance model, the motivational model, the theory of planned behavior, a model combining the technology acceptance model and the theory of planned behavior, the model of PC utilization, the innovation diffusion theory, and the social cognitive theory. Using data from four organizations over a six-month period with three points of measurement, the eight models explained between 17 percent and 53 percent of the variance in user intentions to use information technology. Next, a unified model, called the Unified Theory of Acceptance and Use of Technology (UTAUT), was formulated, with four core determinants of intention and usage, and up to four moderators of key relationships. UTAUT was then tested using the original data and found to outperform the eight individual models (adjusted R2 of 69 percent). UTAUT was then confirmed with data from two new organizations with similar results (adjusted R2 of 70 percent). UTAUT thus provides a useful tool for managers needing to assess the likelihood of success for new technology introductions and helps them understand the drivers of acceptance in order to proactively design interventions (including training, marketing, etc.) targeted at populations of users that may be less inclined to adopt and use new systems. The paper also makes several recommendations for future research including developing a deeper understanding of the dynamic influences studied here, refining measurement of the core constructs used in UTAUT, and understanding the organizational outcomes associated with new technology use.

A new criterion for assessing discriminant validity in variance-based structural equation modeling

Discriminant validity assessment has become a generally accepted prerequisite for analyzing relationships between latent variables. For variance-based structural equation modeling, such as partial least squares, the Fornell-Larcker criterion and the examination of cross-loadings are the dominant approaches for evaluating discriminant validity. By means of a simulation study, we show that these approaches do not reliably detect the lack of discriminant validity in common research situations. We therefore propose an alternative approach, based on the multitrait-multimethod matrix, to assess discriminant validity: the heterotrait-monotrait ratio of correlations. We demonstrate its superior performance by means of a Monte Carlo simulation study, in which we compare the new approach to the Fornell-Larcker criterion and the assessment of (partial) cross-loadings. Finally, we provide guidelines on how to handle discriminant validity issues in variance-based structural equation modeling.

When to use and how to report the results of PLS-SEM

Purpose The purpose of this paper is to provide a comprehensive, yet concise, overview of the considerations and metrics required for partial least squares structural equation modeling (PLS-SEM) analysis and result reporting. Preliminary considerations are summarized first, including reasons for choosing PLS-SEM, recommended sample size in selected contexts, distributional assumptions, use of secondary data, statistical power and the need for goodness-of-fit testing. Next, the metrics as well as the rules of thumb that should be applied to assess the PLS-SEM results are covered. Besides presenting established PLS-SEM evaluation criteria, the overview includes the following new guidelines: PLSpredict (i.e., a novel approach for assessing a model’s out-of-sample prediction), metrics for model comparisons, and several complementary methods for checking the results’ robustness. Design/methodology/approach This paper provides an overview of previously and recently proposed metrics as well as rules of thumb for evaluating the research results based on the application of PLS-SEM. Findings Most of the previously applied metrics for evaluating PLS-SEM results are still relevant. Nevertheless, scholars need to be knowledgeable about recently proposed metrics (e.g. model comparison criteria) and methods (e.g. endogeneity assessment, latent class analysis and PLSpredict), and when and how to apply them to extend their analyses. Research limitations/implications Methodological developments associated with PLS-SEM are rapidly emerging. The metrics reported in this paper are useful for current applications, but must always be up to date with the latest developments in the PLS-SEM method. Originality/value In light of more recent research and methodological developments in the PLS-SEM domain, guidelines for the method’s use need to be continuously extended and updated. This paper is the most current and comprehensive summary of the PLS-SEM method and the metrics applied to assess its solutions.

User Acceptance of Computer Technology: A Comparison of Two Theoretical Models

Computer systems cannot improve organizational performance if they aren't used. Unfortunately, resistance to end-user systems by managers and professionals is a widespread problem. To better predict, explain, and increase user acceptance, we need to better understand why people accept or reject computers. This research addresses the ability to predict peoples' computer acceptance from a measure of their intentions, and the ability to explain their intentions in terms of their attitudes, subjective norms, perceived usefulness, perceived ease of use, and related variables. In a longitudinal study of 107 users, intentions to use a specific system, measured after a one-hour introduction to the system, were correlated 0.35 with system use 14 weeks later. The intention-usage correlation was 0.63 at the end of this time period. Perceived usefulness strongly influenced peoples' intentions, explaining more than half of the variance in intentions at the end of 14 weeks. Perceived ease of use had a small but significant effect on intentions as well, although this effect subsided over time. Attitudes only partially mediated the effects of these beliefs on intentions. Subjective norms had no effect on intentions. These results suggest the possibility of simple but powerful models of the determinants of user acceptance, with practical value for evaluating systems and guiding managerial interventions aimed at reducing the problem of underutilized computer technology.

A Theoretical Extension of the Technology Acceptance Model: Four Longitudinal Field Studies

The present research develops and tests a theoretical extension of the Technology Acceptance Model (TAM) that explains perceived usefulness and usage intentions in terms of social influence and cognitive instrumental processes. The extended model, referred to as TAM2, was tested using longitudinal data collected regarding four different systems at four organizations (N = 156), two involving voluntary usage and two involving mandatory usage. Model constructs were measured at three points in time at each organization: preimplementation, one month postimplementation, and three months postimplementation. The extended model was strongly supported for all four organizations at all three points of measurement, accounting for 40%–60% of the variance in usefulness perceptions and 34%–52% of the variance in usage intentions. Both social influence processes (subjective norm, voluntariness, and image) and cognitive instrumental processes (job relevance, output quality, result demonstrability, and perceived ease of use) significantly influenced user acceptance. These findings advance theory and contribute to the foundation for future research aimed at improving our understanding of user adoption behavior.

On the Evaluation of Structural Equation Models

Partial least squares structural equation modeling (PLS-SEM)

Purpose – The authors aim to present partial least squares (PLS) as an evolving approach to structural equation modeling (SEM), highlight its advantages and limitations and provide an overview of recent research on the method across various fields. Design/methodology/approach – In this review article, the authors merge literatures from the marketing, management, and management information systems fields to present the state-of-the art of PLS-SEM research. Furthermore, the authors meta-analyze recent review studies to shed light on popular reasons for PLS-SEM usage. Findings – PLS-SEM has experienced increasing dissemination in a variety of fields in recent years with nonnormal data, small sample sizes and the use of formative indicators being the most prominent reasons for its application. Recent methodological research has extended PLS-SEM's methodological toolbox to accommodate more complex model structures or handle data inadequacies such as heterogeneity. Research limitations/implications – While research on the PLS-SEM method has gained momentum during the last decade, there are ample research opportunities on subjects such as mediation or multigroup analysis, which warrant further attention. Originality/value – This article provides an introduction to PLS-SEM for researchers that have not yet been exposed to the method. The article is the first to meta-analyze reasons for PLS-SEM usage across the marketing, management, and management information systems fields. The cross-disciplinary review of recent research on the PLS-SEM method also makes this article useful for researchers interested in advanced concepts.

Technology Acceptance Model 3 and a Research Agenda on Interventions

ABSTRACT Prior research has provided valuable insights into how and why employees make a decision about the adoption and use of information technologies (ITs) in the workplace. From an organizational point of view, however, the more important issue is how managers make informed decisions about interventions that can lead to greater acceptance and effective utilization of IT. There is limited research in the IT implementation literature that deals with the role of interventions to aid such managerial decision making. Particularly, there is a need to understand how various interventions can influence the known determinants of IT adoption and use. To address this gap in the literature, we draw from the vast body of research on the technology acceptance model (TAM), particularly the work on the determinants of perceived usefulness and perceived ease of use, and: (i) develop a comprehensive nomological network (integrated model) of the determinants of individual level (IT) adoption and use; (ii) empirically test the proposed integrated model; and (iii) present a research agenda focused on potential pre‐ and postimplementation interventions that can enhance employees' adoption and use of IT. Our findings and research agenda have important implications for managerial decision making on IT implementation in organizations.

Structural Equation Modeling and Regression: Guidelines for Research Practice

The growing interest in Structured Equation Modeling (SEM) techniques and recognition of their importance in IS research raises the need to compare and contrast the different types of SEM techniques so that research designs can be selected appropriately. After assessing the extent to which these techniques are currently being used in IS research, the article presents a running example which analyzes the same dataset via three very different statistical techniques. It then compares two classes of SEM: covariance-based SEM and partial-least-squares-based SEM. Finally, the article discusses linear regression models and suggests guidelines as to when SEM techniques and when regression techniques should be used. The article concludes with heuristics and rule of thumb thresholds to guide practice, and a discussion of the extent to which practice is in accord with these guidelines.